S-320 / S-320N Eye Hoist Hooks

» Rigging Hardware Index
» Catalog Index

Crosby Group Logo

All Crosby 320 Eye Hoist Hooks incorporate the following features:

Crosby 320 Eye Hoist Hooks
  • The most complete line of Eye hoist hooks.
  • Available in carbon steel and alloy steel.
  • Designed with a 5:1 Design Factor for (Carbon Steel); 4:1 Design Factor for (Alloy Steel).
  • Eye hooks are load rated.
  • Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk.
  • Every Crosby Eye Hook has a pre-drilled cam, which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added.
  • Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.
  • Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
  • Hoist hooks incorporate two types of strategically placed markings forged into the product, which address two (2) QUIC-CHECK® features:
    - Deformation Indicators and Angle Indicators.


The following additional features have been incorporated in the new Crosby S-320N Eye Hoist Hooks.

Crosby S-320N Eye Hoist Hooks.
Sizes 3/4 metric ton Carbon through 22 metric ton Alloy
  • Metric Rated at 5:1 Design Factor for (Carbon Steel); 4:1 Design Factor for (Alloy Steel).
  • Can be proof tested to 2 times the working Load Limit.
  • Low profile hook tip.
  • New integrated latch (S-4320) meets the World class standard for lifting.
  • Heavy-duty stamped latch interlocks with the hook tip.
  • High cycle, long life spring.
  • When secured with proper cotter pin through the hole in the tip of hook, meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) for personnel hoisting.
  • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.


S-320 / S-320N Eye Hooks

* Eye Hooks (3/4 TC - 22TA), Proof load is 2 times Working Load Limit. Eye Hooks (20 TC - 60TA). All carbon hooks-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 1 ton through 22 ton-average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 tons through 60 tons-average straightening load (ultimate load) is 4.5 times Working Load Limit.
† New 320N style hook.

Rigging Hardware Product Warnings


Mazzella Red Divider

Mazzella Overhead Crane & Service Division Mazzella Hoist & Crane Service Division
Mazzella Rigging Division Mazzella Fall Protection Division
Mazzella Warehousing Division Mazzella Metals Division

Mazzella Companies Footer Logo


Planar Client Options
Layout Style
  • Wide
  • Boxed
Theme Preview
escort antalya
best free porn videos la mia prima volta porno porno con cazzi grandi
ankara escort
replica watches
gulus estetigi