... Will Turn 360°
Complies with the machinery directives 2006/42/EG
- RUD Universal bolts and nuts for VLBG - 100% crack detected.
- The hex-head-bolt is suitable for internal and external wrench mounting for types with metric threads.
- Surface protection: CORRUD - DT - at least 20 times better corrosion protection than zinc plating (except for the spot face) after length shortening.
- Thread over whole bolting length "H".
- Bolt is held captive in the body. Replace only with the same quality class bolt.
- Clear identification at the bolt head: RUD, thread size, quality class.
- The load ring must be installed perpendicular to the workpiece. The workpiece must be flat, providing complete contact for the load ring bushing.
- Load ring has to be adjusted in pull direction, free to move and must not support on edges.
- Use according to user instructions and by trained persons.
- The lifting attachment must be free to move when attached to the load ring.
- Regular inspections should be carried out by a competent person (BGR 500).
- Load should not be turned during lifting.
VLBG Load Ring will turn 360°, adjustable in pull direction. Load ring foldable, full WLL in any load direction, surface pink powder coated.
BG = German Employers Requires: The max. lengths of the RUD - bolts are adjusted in such a way that if a hex-head-shaped nut (DIN EN ISO 7042) is used, assemblies of material thickness of approximately 8 *M (for M8 - M30) and 5 *M for (M36 - M48) can be realized respectively.
Attention: Refer to RUD user instructions.
The WLL (Working Load Limit) is listed at the nominal value (worst case scenario) unless otherwise specified.