Strand Laid Grommets


» Slings & Assemblies Index
» Catalog Index


Strand Laid Grommets have either a wire rope body, or a body of six ropes laid helically around a strand core, with either a hand tucked or a mechanical splice to form an endless body. Minimum circumference of the sling is 96 times the grommet body diameter.


Mazzella Overhead Crane & Service Division Mazzella Hoist & Crane Service Division
Mazzella Rigging Division Mazzella Fall Protection Division
Mazzella Warehousing Division Mazzella Metals Division


Mazzella Companies Footer Logo


SOCIAL MEDIA:

Hand Tucked Spliced Continuous Construction—

Made from one continuous strand of wire rope.

Hand Tucked Spliced Continuous Construction

Hand Tucked Spliced Continuous Construction

6 x 19 and 6 x 36 Class—Fiber Core EIPS

Rated capacities basket hitch and vertical lift based on D/d ratio of 5 where "d" = body diameter of the finished grommet and "D" is the diameter of the pin
Rated capacities based on design factor of 5
Rated capacities based on pin diameter no smaller than 5 times the body diameter
Horizontal sling angles less than 30 degrees shall not be used

Mechanical Splice—

Single-part wire rope sling body.

Mechanical Splice

Mechanical Splice

6 x 19 and 6 x 36 Classification—EIPS-IWRC

Rated capacities basket hitch and vertical lift based on D/d ratio of 5 where "d" = body diameter of the finished grommet and "D" is the diameter of the pin
Rated capacities based on design factor of 5
Rated capacities based on pin diameter no smaller than 5 times the body diameter Horizontal sling angles less than 30 degrees shall not be used

THE MAZZELLA COMPANIES

Mazzella Red Divider