Bill Franz Named President of Associated Wire Rope Fabricators (AWRF)
Bill is the third AWRF president that has come from Mazzella Companies. Tony Mazzella and Jim Mazzella are former AWRF…
Read Article
Bill is the third AWRF president that has come from Mazzella Companies. Tony Mazzella and Jim Mazzella are former AWRF…
Read Article
Mazzella Lifting Technologies, lost a long-time employee on July 20, 2015—James “Jimmy the Jet” Murray. James was employed with Mazzella…
Read Article
Mazzella Companies has acquired New Tech Machinery (NTM) of Denver, CO. New Tech Machinery is one of the leading manufacturers…
Read Article
While the 6x19 ropes give primary emphasis to abrasion resistance in varying degrees, the 6x36 ropes are important for their…
Read Article
Edge Guard sling protection offers additional abrasion resistance when lifting loads with edges.
Read Article
Use this table as a guide to determine which Peerless/ACCO chain size and leg styles are best for your requirements.…
Read Article
Efficiency ratings for wire rope end terminations are based upon the minimum breaking force of wire rope. The efficiency rating…
Read Article
Wire rope consists of three basic components. While few in number, these vary in both complexity and configuration so as…
Read Article
The radius of bend has an effect on the strength of wire rope. In order to take this fact into…
Read Article
Although improper use or maintenance can cause a wire rope to wear out prematurely, proper and timely inspection will ensure…
Read Article
From childhood, many of us have been conditioned to think of a machine as some device with gears, shafts, belts,…
Read Article
Upon special request, a premium splice known as a tapered and concealed splice can be provided. Slings with rope bodies…
Read Article