Resources

Why Are Engineered Below-the-Hook Devices Better than Homemade Devices?

You may have dependable engineers on staff who are capable of making an in-house below-the-hook lifting device. However, doing so…

OSHA Inspection Series: How Important Are Rigging Inspections?

At least one periodic inspection of your rigging equipment is required every 12 months (at a minimum) per OSHA and…

A How-To Guide to Ordering HMPE Synthetic Rope Slings

Are you looking to order new HMPE synthetic rope slings to replace your current rigging gear? Here is a how-to…

Fall Protection Harness Inspection Field Reference [Guide]

OSHA Inspection Series: How Can Lifting & Rigging Training Help with OSHA Compliance?

Having properly trained workers is one of the most important ways to avoid having incidents on the job site. To…

How to Perform a Fall Protection Harness Inspection

Do you know the rejection criteria for your fall protection harness? There are many types of damage that independently of…

The Basics of Fall Protection in 6 Minutes

Six minutes could save your life. Knowing the requirements for personal fall protection will go a long way in ensuring…

Hierarchy of Fall Protection [Infographic]

Are your employees working at height and need to control fall hazards? This infographic will help your team identify controls,…

Which Shackle Should You Be Using?

A shackle is a u-shaped, load-bearing connecting device designed to be used with a removable pin. Shackles can be used…

Harrington RY Electric Wire Rope Hoists: History, Design, Best Fits

Why should you consider purchasing an RY Electric Wire Rope Hoist from Harrington? Simply put, after more than 150 years…

Basic Rigging Terms You Should Know

Perhaps, you’re in a role where you’re purchasing rigging equipment for your company, but not necessarily doing much of the…

A Basic How-To Guide for Ordering Alloy Steel Chain Slings

Are you looking to order new alloy steel chain slings to replace your current rigging gear? Here is a how-to…