Are Inspection Tags Required for Rigging Gear That’s Been Inspected?
Bryan Holmgren is the Regional Rigging Inspection Manager for Mazzella, and he's here to answer some of the questions you…
Watch VideoResources
Do I Need a Model or Serial Number to Order a Hoist Part?
Robert Smothers has spent over 30 years in the lifting and rigging industry, and he's putting his knowledge to use…
Watch Video
How Much Rigging Training Does a New Hire Need?
Al Abel is a winner of the 2018 Crane Hot Line Corporate Top Trainer award and is a Lifting Specialist…
Watch Video
On-Site Replacement Sand Line for Drilling and Workover Rigs
When your rig goes down and you need to swap out and replace a drill line, tubing line, or a…
Watch Video
Can My Company Perform Our Own Periodic Fall Protection Inspections?
Tom Horner is the Corporate Rigging Inspection Manager for Mazzella and he's here to answer some of the questions you…
Watch Video
Can I Repair a Damaged Latch on a Sling Hook or Crane Hook?
Adam Franz is a Regional Sales Manager with Mazzella Companies, and he's here to answer some questions about ordering replacement…
Watch Video
How Do I Report a Safety Hazard When Safety Isn’t My Job?
Al Abel is a Lifting Specialist for Mazzella in Cleveland, OH and he's here to answer some of the questions…
Watch Video
What Employees Should Attend a Lifting and Rigging Training?
Wayne Garrett is a Lifting Specialist with Mazzella out of Pittsburgh, PA. He's here to answer some of the questions…
Watch Video
Meet the Team Making Your Engineered Below-the-Hook Lifting Devices
Whether it's a common lift beam for a 150 lbs. load, or a specially-engineered 330-ton electric furnace lifter, we treat…
Watch Video
How Do I Keep My Sling Tags From Falling Off in the Field?
Jason Kuhlman is a Lifting Specialist with Mazzella out of Oklahoma City. He's here to answer some of the questions…
Watch Video
What Do I Do If My Sling Tag Falls Off in the Field?
Jason Kuhlman is a Lifting Specialist with Mazzella based out of Oklahoma City. He's here to answer some of the…
Watch Video
Are Non-Destructive Testing Inspections Required for Below-the-Hook Lifting Devices?
Tom Horner is the Corporate Rigging Inspection Manager for Mazzella and he addresses a question we often receive when it…
Watch Video
What Is the Importance of Lifting and Rigging Training?
Wayne Garrett is a Lifting Specialist with Mazzella Lifting Technologies out of Pittsburgh, PA. He's here to answer some of…
Watch Video
What Do I Do If My Below-the-Hook Lifting Device Fails an Inspection?
Dan Sherwood is a Product Manager with Mazzella Lifting Technologies out of Cleveland, Ohio. He's here to answer some of…
Watch Video
What Affects the Lead Time of a Custom Below-the-Hook Lifting Device?
Dan Sherwood is a Product Manager with Mazzella Lifting Technologies out of Cleveland, Ohio. He's here to answer some of…
Watch Video
Can I Tip Load When Using a Locking Sling Hook?
Matt Burk is an Inside Sales Manager with Mazzella Lifting Technologies out of Cleveland, Ohio. He's here to answer some…
Watch Video
Can I Use a Makeshift Skid Pan For an Overhead Lift On a Job Site?
Devon McCarty works out of our Cleveland, Ohio branch. He's here to answer a question about using a makeshift skid…
Watch Video
How to Inspect a Synthetic Web Sling to OSHA and ASME Standards
Proper inspection of your synthetic web slings for damage or irregularities, prior to each use, is the best way to…
Watch Video
Does My Below-the-Hook Lifter Require Load Testing Before First Use?
Lili Radu, P.E. is a Chief Engineer working with the Below-the-Hook department here at Mazzella Companies. She's here to answer…
Watch Video
How to Inspect Alloy Chain Slings to OSHA and ASME Standards
Proper inspection of your chain slings for damage or irregularities, prior to each use, is the best way to help…
Watch Video
What is a “Safety Hook” in the Lifting and Rigging Industry?
Matt Burk is an Inside Sales Manager with Mazzella Lifting Technologies out of Cleveland, Ohio. He's here to answer some…
Watch Video
What Lifting Clamp Do I Need For 2-Ton Operations?
Tom Shuey is a Sales Specialist with Mazzella Lifting Technologies out of Cleveland, Ohio. He's here to discuss how to…
Watch Video
How Do I Stay on Top of Lifting and Rigging Industry Standards?
Lili Radu, P.E. is a Chief Engineer working with the Below-the-Hook department here at Mazzella Companies. She's here to answer…
Watch Video
How to Inspect a High-Performance Roundsling to ASME Standards
Learn more about high-permance roundsling inspection in this video featuring removal from service and ASME B30.9 inspection criteria.
Watch Video