Morse Starrett Logo

MO-ST®—Models 1, 1A and 2

MO-ST®—Models 1, 1A and 2

The impact type wire rope cutters are the original portable tools invented by Morse-Starrett to cut wire rope. The cutters are actuated by striking with a hammer, they are easy to operate and do a superior cutting job with only a few blows of a hammer. These cutters are precision engineered to deliver a cut without affecting the original roundness of the wire rope. The blades and dies are made of the finest tool steel available, heat treated and ground to close tolerances. The impact style cutters are available in three sizes and cutting capacities. The Model 1 has a 3/4" capacity, the Model 1A a 1-1/16" capacity and the Model 2 has a 1-1/2" capacity. Replacement blades are also available.



HYDRASHEAR®—Models W-075, P-1125 and C-1750

HYDRASHEAR®—Models W-075, P-1125 and C-1750

The self-contained hydraulic cable cutter is a precision-engineered tool designed to give a clean cut with minimum effort. Just pump the handle...no outside power is required. This self-contained portable tool can be easily carried and is used by contractors, rigging lofts and elevator repairmen. All three models will operate under water. The Pell HYDRASHEAR® is recommended by wire rope manufacturers and used by industries throughout the world. The blades and die sets are made of the finest tool steel available, heat treated and ground to close tolerances. This means a long life for the blades, as well as superior performance. The hydraulic cutters are available in three sizes and capacities. The Model W-075 has a 3/4" capacity, the Model P-1125 a 1-1/8" capacity and the Model C-1750 has a 1-3/4" capacity.



HYDRASHEAR®—Models POC-1125, POC 1750 and POC2500

HYDRASHEAR®—Models POC-1125, POC 1750 and POC2500

The power-operated cutters require an external hydraulic power source for operation. These models can be activated by any electric, gasoline, hand, battery or air operated hydraulic pump capable of developing 10,000 PSI and having free flow return through the pressure line. The pumps are hose-connected to the HYDRASHEAR body. The power-operated cutters are available in three sizes and cutting capacities. The Model POC-1125 has a 1-1/8" capacity, the Model POC1750 a 1-3/4" capacity and the Model POC2500 has a 2-1/2" capacity.

THE MAZZELLA COMPANIES

Mazzella Red Divider


Planar Client Options
Layout Style
  • Wide
  • Boxed
Theme Preview