Resources

Diagnose Your Crane From the Ground – A Look at CM’s Intelli-Connect™

Are you looking for a way to diagnose issues with your cranes and hoists without losing the time of shutting…

OSHA Inspection Series: The Principles of Fall Protection Safety

Would it surprise you to know that working at height is one of OSHA’s top cited incidents year over year?…

Overhead Crane Requirements – The OSHA Inspection Series – Ep 5

Keeping your overhead crane in service and in peak operating condition, is a top priority for you, us, and OSHA.…

A Basic How-To Guide for Ordering Alloy Steel Chain Slings

Are you looking to order new alloy steel chain slings to replace your current rigging gear? Here is a how-to…

Basic Rigging Terms You Should Know

Perhaps, you’re in a role where you’re purchasing rigging equipment for your company, but not necessarily doing much of the…

Harrington RY Electric Wire Rope Hoists: History, Design, Best Fits

Why should you consider purchasing an RY Electric Wire Rope Hoist from Harrington? Simply put, after more than 150 years…

Hierarchy of Fall Protection [Infographic]

Are your employees working at height and need to control fall hazards? This infographic will help your team identify controls,…

How to Perform a Fall Protection Harness Inspection

Do you know the rejection criteria for your fall protection harness? There are many types of damage that independently of…

The Basics of Fall Protection in 6 Minutes

Six minutes could save your life. Knowing the requirements for personal fall protection will go a long way in ensuring…

Fall Protection Harness Inspection Field Reference [Guide]

OSHA Inspection Series: How Can Lifting & Rigging Training Help with OSHA Compliance?

Having properly trained workers is one of the most important ways to avoid having incidents on the job site. To…

A How-To Guide to Ordering HMPE Synthetic Rope Slings

Are you looking to order new HMPE synthetic rope slings to replace your current rigging gear? Here is a how-to…

Why Are Engineered Below-the-Hook Devices Better than Homemade Devices?

You may have dependable engineers on staff who are capable of making an in-house below-the-hook lifting device. However, doing so…

No-Touch Electrode Handling Systems Brochure

Wire Rope Gripper Kit

OSHA Inspection Series: How Important Are Rigging Inspections?

At least one periodic inspection of your rigging equipment is required every 12 months (at a minimum) per OSHA and…

Fall Protection Inspection Series: How to Inspect Your Harness

Your fall protection equipment keeps you safe, but only if it is in the proper working condition. If your harness…

What Is the Inspection Criteria for Fall Protection Lanyards, SRLs?

Do you know the rejection criteria for your fall protection lanyard and / or SRL? There are many types of…

Fall Protection Inspection Series: Inspecting Your Synthetic SRL, Lanyard

Do you know the rejection criteria for your fall protection lanyard and / or SRL? There are many types of…

What Are the Requirements For an OSHA-Compliant Overhead Crane Inspection?

What is required to be examined during an OSHA-compliant overhead crane inspection? In this article, we outline the steps taken…

Fall Protection Synthetic SRL and Lanyard Inspection Field Reference [Guide]

What Is the Cost of a Rigging Inspection?

Bringing a third-party rigging inspector into your facility shouldn’t be considered an added expense. If you have the proper compliance…

Mazzella Companies Acquires PE Alliance Engineering Services

Mazzella Companies is pleased to announce the acquisition of PE Alliance Engineering Services. This acquisition further strengthens Mazzella's in-house engineering…

What’s In the New ASME B30.20 Below-the-Hook Lifting Devices Standard?

ASME B30.20 Below-The-Hook Lifting Devices sets the standard for lifting. It outlines maintenance, training, safe use, and inspection criteria for…