![OSHA Personnel Designations [Guide]](https://www.mazzellacompanies.com/wp-content/uploads/2022/09/resource-download-osha-designations-guide-768x508.jpg)
OSHA Personnel Designations [Guide]
Do you know who to deem competent, qualified, designated, or certified on your job site? OSHA lists four classifications for…
Download ResourceOSHA and ASME Compliance
Learn more about the applicable standards that relate to the lifting and rigging industries, including: ASME, OSHA, CMAA, ANSI, NEC, and more. You’ll learn about how you can make your lifting and rigging programs compliant, and how often you should be inspecting crane and hoist equipment, as well as rigging equipment like slings and hardware.
From Need to Delivery, Everything You Need to Know to Buy a BTH Device
Engineering a below-the-hook device is one thing, but knowing about the process, timelines, approval drawings is another. Using an accredited…
Read Article
How To Perform a Shackle Inspection To ASME B30.26 Standards
Are your shackles still in compliance with ASME standards? In this piece, we discuss shackle identification requirements for the body…
Watch Video
What Are ASME Inspection Standards for Close Proximity Magnet Lifters?
What are the inspection requirements for close proximity magnet lifting below-the-hook devices? The American Society of Mechanical Engineers (ASME) sets…
Read Article
Purchasing a Custom Engineered Below-the-Hook Device: From Need to Delivery
In this video, we’ll explain the process for engineering and manufacturing a custom BTH device, from identifying a need, to…
Watch Video
How Are Swivel Hoist Rings Inspected and Repaired, per ASME Standards?
How are swivel hoist rings inspected, and how can they be repaired? There are very specific qualifications set forth by…
Read Article
How to Fit a 3M™ DBI-SALA® ExoFit™ X300 Safety Harness
Wearing a harness is only one step in the fall protection process. Harnesses must fit properly, and be regularly inspected…
Watch Video
ASME B30.16-2022: Updates & Revisions to the ASME B30.16 Standard
ASME B30.16 Overhead Underhung and Stationary Hoists helps set the standards for the lifting and rigging industry. It outlines maintenance,…
Read Article
Buyer’s Guide: How To Shop for a Fall Protection Harness
Harnesses are a critical piece of “personal fall protection,” and full-body harnesses are approved for use in: fall arrest, positioning,…
Watch Video
What Are ASME’s Inspection Standards for Vacuum Lifting Devices?
What are the inspection requirements for vacuum lifting below-the-hook devices? The American Society of Mechanical Engineers (ASME) sets the standard…
Read Article
Does ASME Require Eyebolts to Have a Stamped Working Load Limit?
Is an eyebolt required to have a working load limit stamped on it, per ASME standards? According to the standard,…
Read Article
What’s In the New ASME B30.20 Below-the-Hook Lifting Devices Standard?
ASME B30.20 Below-The-Hook Lifting Devices sets the standard for lifting. It outlines maintenance, training, safe use, and inspection criteria for…
Watch Video
ASME B30.20-2021: Updates & Revisions to the Below-The-Hook Standard
ASME B30.20 Below-The-Hook sets the standards for lifting. It outlines maintenance, training, safe use, and inspection criteria for all lifting…
Read Article![Fall Protection Synthetic SRL and Lanyard Inspection Field Reference [Guide]](https://www.mazzellacompanies.com/wp-content/uploads/2022/06/resource-download-fall-protection-SRL-lanyard-inspection-removal-criteria-poster-768x508.jpg)
What Are the Requirements For an OSHA-Compliant Overhead Crane Inspection?
What is required to be examined during an OSHA-compliant overhead crane inspection? In this article, we outline the steps taken…
Read Article
What Is the Inspection Criteria for Fall Protection Lanyards, SRLs?
Do you know the rejection criteria for your fall protection lanyard and / or SRL? There are many types of…
Read Article
Homemade vs. Custom Below-the-Hook Lifting Devices
You may have dependable engineers on staff who are capable of making an in-house below-the-hook lifting device. However, doing so…
Watch Video
Fall Protection Inspection Series: How to Inspect Your Harness
Your fall protection equipment keeps you safe, but only if it is in the proper working condition. If your harness…
Watch Video
Why Are Engineered Below-the-Hook Devices Better than Homemade Devices?
You may have dependable engineers on staff who are capable of making an in-house below-the-hook lifting device. However, doing so…
Read Article
OSHA Inspection Series: How Important Are Rigging Inspections?
At least one periodic inspection of your rigging equipment is required every 12 months (at a minimum) per OSHA and…
Read Article![Fall Protection Harness Inspection Field Reference [Guide]](https://www.mazzellacompanies.com/wp-content/uploads/2022/05/resource-download-fall-protection-harness-inspection-guide-768x508.jpg)
OSHA Inspection Series: How Can Lifting & Rigging Training Help with OSHA Compliance?
Having properly trained workers is one of the most important ways to avoid having incidents on the job site. To…
Read Article
How to Perform a Fall Protection Harness Inspection
Do you know the rejection criteria for your fall protection harness? There are many types of damage that independently of…
Read Article
The Basics of Fall Protection in 6 Minutes
Six minutes could save your life. Knowing the requirements for personal fall protection will go a long way in ensuring…
Watch Video